Skip to content
Please note that the currency is CAD. We're here to help if you need any assistance. Nous offrons un service à la clientèle en français / 1.888.880.7126
Please note that the currency is CAD. We're here to help if you need any assistance. Nous offrons un service à la clientèle en français / 1.888.880.7126

SS-32R iGrip Shouldered Racing Tire Studs

by iGrip
5 reviews

Notify me when back in stock


  • Oversized and pointed tungsten carbide
  • For enhanced traction
  • Hot-dipped steel and galvanized stud
  • Big tread for good anchoring
  • Lasting durability
  • Light
  • Easy to install and dismantle
  • 100, 150, 200, 250 and 1000 unit packages

Please note that an installation tool is included in each box


  • Snowmobile
  • Motocross
  • ATV

We recommend this product for: Snowmobile track 1.5'' & more. INSTALLATION GUIDE HERE.

*Please note that if you have a 1.5'' or 1.6'' pre-drilled track, you will need the ST-25R. They are a bit thicker, especially made for a pre-drilled track. 


Quantity you need? See below:

Track 120 ’’ / about 150 to 200 studs
Track 137 '' / about 200 to 250 studs
Track 144 '' / about 200 to 350 studs


To know how many crossbars you have on your track:

You take the length of the track, for example 136’’. You must know the drive pitch, to do so measure between each crossbars, for example 2.52’’.

136 divided per 2.52= 53.96 You should have about 54 crossbars.

If you do a pattern 4 per bar, 54 x 4 = you need 216 studs.

If you do a pattern 5-4-4, for an average of 4.3 studs per bar x 54 = you need 232 studs

Every model is different so please check this before ordering. Thank you! 

Customer Reviews
4.6 Based on 5 Reviews
5 ★
4 ★
3 ★
2 ★
1 ★
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
Jamie C.

Luckily bought a box from another website aswell.

Studs were fine, the tool to install them snapped after installing like 4 studs. Luckily I had bought from a different website before and still had the tool that came from them.

A IGripStore Customer
Chris S.
Canada Canada

Excellent quality and offers a huge improvement in grip

Quick and easy to install, took about 45 minutes to install 150 studs. I just wanted a bit of extra traction due to the ice this year and I was amazed. It helps a tonne, but I was blown away by the added stopping power. Such a worthwhile upgrade, wish I had done it sooner. Thanks!

Jim v.
United States United States

No spin outs

Installed them mostly without predrilling , they have stopped my 165hp hp sled from spinning out . Couldn't be happier with the increase of traction as well the stopping power.

Michael H.
United States United States

Alternative to conventional studs

The ordering process was easy. People were extremely friendly and helpful. Once I received the product it was very simple and easy installation, I hope they work as intended and track holds up. 1.5 storm track. Time will tell but if they work much easier to install

Millard T.


Love these screws