SS-32R iGrip Shouldered Racing Tire Studs
- Oversized and pointed tungsten carbide
- For enhanced traction
- Hot-dipped steel and galvanized stud
- Big tread for good anchoring
- Lasting durability
- Easy to install and dismantle
- 100, 150, 200, 250 and 1000 unit packages
Please note that an installation tool is included in each box
We recommend this product for: Snowmobile track 1.5'' & more. INSTALLATION GUIDE HERE.
*Please note that if you have a 1.5'' or 1.6'' pre-drilled track, you will need the ST-25R. They are a bit thicker, especially made for a pre-drilled track.
Quantity you need? See below:
Track 120 ’’ / about 150 to 200 studs
Track 137 '' / about 200 to 250 studs
Track 144 '' / about 200 to 350 studs
To know how many crossbars you have on your track:
You take the length of the track, for example 136’’. You must know the drive pitch, to do so measure between each crossbars, for example 2.52’’.
136 divided per 2.52= 53.96 You should have about 54 crossbars.
If you do a pattern 4 per bar, 54 x 4 = you need 216 studs.
If you do a pattern 5-4-4, for an average of 4.3 studs per bar x 54 = you need 232 studs
Every model is different so please check this before ordering. Thank you!