Skip to content
Please note that the currency is CAD. We're here to help if you need any assistance. Nous offrons un service à la clientèle en français / 1.888.880.7126
Please note that the currency is CAD. We're here to help if you need any assistance. Nous offrons un service à la clientèle en français / 1.888.880.7126

ST-24R iGrip Standard Racing Studs

by iGrip
23 reviews

Notify me when back in stock


  • Oversized and pointed tungsten carbide
  • For enhanced traction
  • Hot-dipped steel and galvanized stud
  • Big tread for good anchoring
  • Lasting durability
  • Light
  • Easy to install and dismantle
  • 100, 150, 200, 250 and 1000 unit packages

Please note that an installation tool is included in each box


  • Snowmobile
  • Motocross
  • ATV

We recommend this product for: Snowmobile track 1,25’’ & more. INSTALLATION GUIDE HERE

*Note that if your track is pre-drilled, we recommend the ST-25R which is a little bit bigger in diameter. We're happy to help if you have any questions! 


Quantity you need? See below:

Track 120 ’’ / about 150 to 200 studs
Track 137 '' / about 200 to 250 studs
Track 144 '' / about 200 to 350 studs


To know how many crossbars you have on your track:

You take the length of the track, for example 136’’. You must know the drive pitch, to do so measure between each crossbars, for example 2.52’’.

136 divided per 2.52= 53.96 You should have about 54 crossbars.

If you do a pattern 4 per bar, 54 x 4 = you need 216 studs.

If you do a pattern 5-4-4, for an average of 4.3 studs per bar x 54 = you need 232 studs

Every model is different so please check this before ordering. Thank you! 

Customer Reviews
4.9 Based on 23 Reviews
5 ★
4 ★
3 ★
2 ★
1 ★
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
Matthew S.

Great Product

amazed at how much traction was added to my snowmobile with such little effort as the studs were so easy and fast to install. Also a very cost effective compared to other traction products with 1/4 of the added weight. Very happy with this product and highly recommending to all my friends .

Chris B.
Canada Canada

Great Experience

I reached out to the team at iGrip about studding my Can Am ATV tracks. They collected some info from me and made some recommendations. Turn around was very quick, to the point and helpful. Quick and fast shipping. Very impressed with the process, product and results.

Dany D.
Canada Canada


Je n'ai pas encore roule avec mes igrip. Pour l'installation un outil avec un bout un peu plus long et un plus gros épaulement pour assurer la bonne longueur serait un plus et un outil pour enlever les igrip idéalement sans épaulement

Aime T.
Canada Canada

Great substitute

iGrip studs are easy to install and a great substitute to a stock studded tracks. Very good quality and I recommend it to all my friends that there tracks are not studded. A+++

Roland K.
United States United States

Easy to install

Sharp and quick to install. Really light too